RECARO Base Frame Seat Rail Standard Type Right - Leaf ZE1
24829
JPY
RECARO
SKU: 260884
PN: 2081.010.2This item is designed as a direct bolt on application to the body frame providing a solid mounting base that is compatible with a variety of different sports and race seats. One piece construction provides an extremely durable base while also providing a slightly lowered ride height ideal for sports applications. In addition the rails are designed to provide extensive back and forth slide adjustability with fine lock notches on both sides. Drive position can be further fine tuned with the use of optional offset stays or spacers. Can be used as is or with a diverse variety of different seats when used in conjunction with the compatible adapters. Get this and all your JDM at RHDJapan!!
Brand: Recaro
Product: Base Frame Seat Rail Standard Type Right - Leaf ZE1
Part Num: 2081.010.2
SPECIFICATIONS:
Type: New-type frame. One-position type.
PRODUCT NOTES:
- Function of side airbag loses. Need to cancel airbag warning indicator. Seating position: 6mm lower than the lowest height of OEM seat. (A case of New LX-F) Seat offset is same as OEM seat. The length of slider is 20 mm shorter than OEM slider.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)
- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Modification is needed to replace rear heating switch from passenger seat to another place. Optional equipment car is unconfirmed.
- IS-84 LX(Including JP ERGOMED series),LS,LT need thin type recliner dial(PN 1600090J) need to replace standard recliner dial on inner side to reduce interference on console side. There is interference between seat recliner and floor carpet on the most rear position. => Sportster,Cross Sportster. There is a few mm interference between seat backrest side and door trim=>TREND. SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.
COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.
- RMS2600A / 2700G: A separate side adapter must be provided.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SP-G / SP-A: A separate side adapter must be provided.
- SP-GN / SP-AN: A separate side adapter must be provided.
- RACER SP-G/A: A separate side adapter must be provided.
- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 TREND-D AM19 TREND-DC
- AM19 STYLE-D AM19 STYLE-DC
- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV
- TS-# / RS-#: A separate side adapter must be provided.
- SP-X
- SR-6 / SR-7 / SR-7F / SR-11
- Sportster / Cross Sportster
Product: Base Frame Seat Rail Standard Type Right - Leaf ZE1
Part Num: 2081.010.2
SPECIFICATIONS:
Type: New-type frame. One-position type.
PRODUCT NOTES:
- Function of side airbag loses. Need to cancel airbag warning indicator. Seating position: 6mm lower than the lowest height of OEM seat. (A case of New LX-F) Seat offset is same as OEM seat. The length of slider is 20 mm shorter than OEM slider.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)
- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Modification is needed to replace rear heating switch from passenger seat to another place. Optional equipment car is unconfirmed.
- IS-84 LX(Including JP ERGOMED series),LS,LT need thin type recliner dial(PN 1600090J) need to replace standard recliner dial on inner side to reduce interference on console side. There is interference between seat recliner and floor carpet on the most rear position. => Sportster,Cross Sportster. There is a few mm interference between seat backrest side and door trim=>TREND. SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.
COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.
- RMS2600A / 2700G: A separate side adapter must be provided.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SP-G / SP-A: A separate side adapter must be provided.
- SP-GN / SP-AN: A separate side adapter must be provided.
- RACER SP-G/A: A separate side adapter must be provided.
- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 TREND-D AM19 TREND-DC
- AM19 STYLE-D AM19 STYLE-DC
- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV
- TS-# / RS-#: A separate side adapter must be provided.
- SP-X
- SR-6 / SR-7 / SR-7F / SR-11
- Sportster / Cross Sportster
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Nissan Leaf ZE1 EV (10/2017~)
Nissan Leaf ZE1 EV (10/2017~)
Customers who bought this product also purchased
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Just amazing the build quality and style Review by Ihsan
Very good quality bucket seat. Comfortable and adjustable. Arrived very well packaged and the carbon is of very good quality, high quality of manufacture. I highly recommend this product for purists and those who appreciate this type of seat. Expensive but it is worth it because it is the quality of manufacture and materials that you do not find on replica seats.
Great sounding exhaust Review by Dave
The exhaust sounds great! It has a refined tone and isn't going to upset the neighbours with loudness.
Kakimoto Racing Class KR Muffler Exhaust System Review by Sean
Nice sounding, not too loud just a deep undertone
Awesome partners Review by Sham
Awesome service overall and trustworthy.
HKS The World Review by ZeroIX
Fits my small hand, looks good and high quality.
