This item is a direct replacement for the highly restrictive factory catalytic converter. Superior materials and design with honeycomb structure metal catalyzer allows for high flow of exhaust while keeping exhaust gases clean. Smooth flowing mainpipe with enhanced diameter allowing engine to exhale the hot exhaust gases more efficiently improving engine response and increasing power and torque throughout the whole power band. In addition to cleaner emissions and overall increased performance output this item also adds to a more solid quality exhaust note. Get this and all your JDM at RHDJapan!!
Brand: SARD
Product: Sports Catalyzer - AP1 4/00~3/04
Part Number: 89066
SPECIFICATIONS:
Conform to Japan security standards
Made to order 1.5 months
Material: Stainless Steel (SUS304)
Cells Per Square Inch : 180~200 cpsi (OEM: 400 cspi)
Performance increase : up to 9~17 hp, highly dependent on your setup.
Pipe Diameter IN/OUT (mm): 76/60
COMPATIBILITY NOTES:
- Only for 6MT vehicles
FEATURES:
- The large diameter cell features a precious metals coating, that demonstrates a excellent purification performance. The pressure loss is reduced to the absolute minimum.
- The EX manifold achieves an improvement of in the exhaust efficiency.
- High response & high-power compared to the stock OEM catalyst.
- Complies with the security standard. A high purification performance has been combined with improvement of the exhaust efficiency.
- Heat Shield Plate equipped.
- Direct bolt on easy installation for each vehicle.
Product: Sports Catalyzer - AP1 4/00~3/04
Part Number: 89066
SPECIFICATIONS:
Conform to Japan security standards
Made to order 1.5 months
Material: Stainless Steel (SUS304)
Cells Per Square Inch : 180~200 cpsi (OEM: 400 cspi)
Performance increase : up to 9~17 hp, highly dependent on your setup.
Pipe Diameter IN/OUT (mm): 76/60
COMPATIBILITY NOTES:
- Only for 6MT vehicles
FEATURES:
- The large diameter cell features a precious metals coating, that demonstrates a excellent purification performance. The pressure loss is reduced to the absolute minimum.
- The EX manifold achieves an improvement of in the exhaust efficiency.
- High response & high-power compared to the stock OEM catalyst.
- Complies with the security standard. A high purification performance has been combined with improvement of the exhaust efficiency.
- Heat Shield Plate equipped.
- Direct bolt on easy installation for each vehicle.
Honda S2000 AP1 F20C (04/1999-09/2003)
Honda S2000 AP1 F20C (09/2003-11/2005)
Honda S2000 AP1 F20C (09/2003-11/2005)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Great product! Review by David
Great product, looks super strong compared to a standard one. Plus the price including shipping was less than a standard bearing in the UK!
Great parts Review by David
Great parts that fit great and look great once installed. Very fast delivery too!
Great Product Review by Daniel
Great replacement product. The car is stiffer through the corner.
Only TEMS replacement available Review by Rama
Overall these TEMS shocks are very well made. Beware of few things though. These shocks are harder damped than stock. Also I found that the spring perch sits a little bit higher than originals, causing the ride height on the front to go up higher by roughly 20mm with old stock springs. I highly recommend you to buy lowering springs if you want to use these.
after a few months usage, i bought RSR down ti2000 to match with these.
after a few months usage, i bought RSR down ti2000 to match with these.
Nice and Quick Review by Sam Wing
Do not have to worry about getting fake products.
