These are much stronger and thicker than the OEM tie rods found on stock vehicles. Therefore there is less of a chance that your tie rod will break in the middle of drifting or hard driving where the conditions are harsh on your steering components. As well as added strength, once you have installed these you will notice that your steering angle will be increased, this is because of the Uras Super Tie Rod design. After installing, it is best to get the front toe realigned to get the most from your steering. Get this and all your JDM at RHDJapan!!
Brand: Uras
Product: Super Tie Rod Set - S13
Part Number: 87091_234806
COMPATIBILITY NOTES:
- OEM replacement, works with OEM hardware
Product: Super Tie Rod Set - S13
Part Number: 87091_234806
COMPATIBILITY NOTES:
- OEM replacement, works with OEM hardware
Nissan 180SX RPS13 SR20DE (08/1996-12/1998)
Nissan 180SX RPS13 SR20DET (01/1991-12/1993)
Nissan 180SX RPS13 SR20DET (01/1994-07/1996)
Nissan 180SX RPS13 SR20DET (08/1996-12/1998)
Nissan 180SX RS13 CA18DE (04/1989-01/1991)
Nissan 180SX RS13 CA18DET (04/1989-01/1991)
Nissan Silvia PS13 SR20DE (01/1991-10/1993)
Nissan Silvia PS13 SR20DET (01/1991-10/1993)
Nissan Silvia S13 CA18DE (05/1988-01/1991)
Nissan Silvia S13 CA18DET (05/1988-01/1991)
Nissan 180SX RPS13 SR20DET (01/1991-12/1993)
Nissan 180SX RPS13 SR20DET (01/1994-07/1996)
Nissan 180SX RPS13 SR20DET (08/1996-12/1998)
Nissan 180SX RS13 CA18DE (04/1989-01/1991)
Nissan 180SX RS13 CA18DET (04/1989-01/1991)
Nissan Silvia PS13 SR20DE (01/1991-10/1993)
Nissan Silvia PS13 SR20DET (01/1991-10/1993)
Nissan Silvia S13 CA18DE (05/1988-01/1991)
Nissan Silvia S13 CA18DET (05/1988-01/1991)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Nice nismo Review by Ahmed
Like it
I like RHDJapan Review by Ahmed
Thanx
I like Review by Ahmed
Good for rb26
It's a necessary piece of rubber Review by kuuko
This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.
Replacing these bushes was long overdue Review by kuuko
These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.
