Works Bell Standard Boss Kit - 621

Brand: Works Bell
Product: Standard Boss Kit - 621
Part Num: 621

SPECIFICATIONS:
Material: Aluminum

COMPATIBILITY NOTES:
- FPY32 FGY32 FGNY32 FGDY32: Only for Cima equipped with Radio Remote Control Not compatible with vehicles equipped with VDC Not compatible with vehicles equipped with airbags 9/91~6/96
- HR33 ER33 ENR33 ECR33: Only for Skyline equipped with ASCD Not compatible with vehicles equipped with Super Hicas 8/93~12/94
- Y32 UY32 PY32 PBY32 PAY32 CY32 CUY32: Only for Cedric/Gloria equipped with air conditioner/Radio Remote Control Not compatible with vehicles equipped with Super Hicas 7/91~6/95
- Y32 UY32 PY32 PBY32 PAY32 CY32 CUY32: Only for Cedric/Gloria equipped with ASCD Not compatible with vehicles equipped with Super Hicas 7/91~6/95
- SC34 HC34 GCC34 GC34: Only for Laurel equipped with ASCD Not compatible with vehicles equipped with Super Hicas 1/93~8/94
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.