Works Bell Standard Boss Kit - 910

Brand: Works Bell
Product: Standard Boss Kit - 910
Part Num: 910

SPECIFICATIONS:
Material: Aluminum

COMPATIBILITY NOTES:
- LWEW LW5W: Only for MPV equipped with airbags 6/99~8/02
- GFEP GFFP GFER GF8P: Only for Capella equipped with airbags 9/97~8/02
- BJ8W BJ5W BJFW BJ5P BJEP BJFP BJ5P BJ3P: Only for Familia equipped with airbags 6/98~10/03
- CP8W CPEW: Only for Premacy equipped with airbags 4/99~1/05
- SKE6V SKF6V SKP2M SKP2V SK22V SK22T SK22M SK22L: Only for Bongo equipped with airbags 6/99~
- NB6C: Only for Roadster equipped with airbags 1/98~8/05
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.