Toda Racing Adjustable Cam Pulley Exhaust - AE111
17209
JPY
TODA RACING
SKU: 50184
PN: 14211-111-001Toda Cam Pulleys are made completely from Duralumin A-7075 which is a higher grade of aluminum commonly found on fighter aircraft landing gear or other high stress areas. The use of A-7075 aluminum allows Toda Racing to offer the strongest and lightest cam pulleys on the market.
Get this and all your JDM at RHDJapan!!
Get this and all your JDM at RHDJapan!!
Brand: Toda Racing
Product: Adjustable Cam Pulley Exhaust - AE111
Part Num: 14211-111-001
SPECIFICATIONS:
Material: Duralumin A-7075
Included: 1 pulley. For a set please add two to the shopping cart.
PRODUCT NOTES:
- Designed only for Levin/Trueno AE111.
- With a vernier degree scale.
- In all sections duralumin A-7075 is used.
- VVT system cannot be used.
COMPATIBILITY NOTES:
- Designed only for Levin/Trueno AE111 with 20 Valves 4A-GE Engine.
FEATURES:
Duralumin A-7075 + Hard anodize equals Light Weight High Rigidity High Accuracy
- High-strength and light weight anodized Duralumin A-7075 is extensively used in both the pulley and the inner plate. Creating a cam pulley that is highly accurate, super light and highly rigid.
- Accurate valve timing for all situations.
- Can be used with the original camshaft.
- The adjustments can be carried to 1 deg of the crank angle. (0.5 deg of the cam angle)
- High Accuracy:
Differing from the standard sintered one piece pulleys. The Toda adjusting cam pulley is made up of two sections (pulley and inner plate) allowing independent movement between the two. This freedom combined with the vernier type graduations (1 deg of crank angle, 0.5 of cam angle) enables the timing to be adjusted accurately giving maximum results.
- Super Lightness:
Duralumin A-7075 is used extensively for both its lightness and its high rigidity in both the plate and the cam pulley. With both improved design and material changes an average weight saving of 30% is found. Along with weight reductions comes a reduction in inertia so increasing the engines responsiveness.
- High Rigidity:
By using Duralumin A-7075 and good design, Toda pulleys have high rigidity. High rigidity leads to improved timing accuracy for either standard or high performance camshafts. Anodized to prevent wear especially form contact with the belt.
Product: Adjustable Cam Pulley Exhaust - AE111
Part Num: 14211-111-001
SPECIFICATIONS:
Material: Duralumin A-7075
Included: 1 pulley. For a set please add two to the shopping cart.
PRODUCT NOTES:
- Designed only for Levin/Trueno AE111.
- With a vernier degree scale.
- In all sections duralumin A-7075 is used.
- VVT system cannot be used.
COMPATIBILITY NOTES:
- Designed only for Levin/Trueno AE111 with 20 Valves 4A-GE Engine.
FEATURES:
Duralumin A-7075 + Hard anodize equals Light Weight High Rigidity High Accuracy
- High-strength and light weight anodized Duralumin A-7075 is extensively used in both the pulley and the inner plate. Creating a cam pulley that is highly accurate, super light and highly rigid.
- Accurate valve timing for all situations.
- Can be used with the original camshaft.
- The adjustments can be carried to 1 deg of the crank angle. (0.5 deg of the cam angle)
- High Accuracy:
Differing from the standard sintered one piece pulleys. The Toda adjusting cam pulley is made up of two sections (pulley and inner plate) allowing independent movement between the two. This freedom combined with the vernier type graduations (1 deg of crank angle, 0.5 of cam angle) enables the timing to be adjusted accurately giving maximum results.
- Super Lightness:
Duralumin A-7075 is used extensively for both its lightness and its high rigidity in both the plate and the cam pulley. With both improved design and material changes an average weight saving of 30% is found. Along with weight reductions comes a reduction in inertia so increasing the engines responsiveness.
- High Rigidity:
By using Duralumin A-7075 and good design, Toda pulleys have high rigidity. High rigidity leads to improved timing accuracy for either standard or high performance camshafts. Anodized to prevent wear especially form contact with the belt.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Toyota Levin/Trueno AE111 4A-GE (05/1995-04/1997)
Toyota Levin/Trueno AE111 4A-GE (04/1997-07/2000)
Toyota Levin/Trueno AE111 4A-GE (05/1995-04/1997)
Toyota Levin/Trueno AE111 4A-GE (04/1997-07/2000)
Customers who bought this product also purchased
Toda Racing Exhaust Manifold Header 4-2-1 SUS - FN2
List Price: ¥203,500
Sale Price: ¥197,199
You Save: ¥6,301
Toda Racing Intake VTC Control Cam Sprocket - 40deg K20A
List Price: ¥33,000
Sale Price: ¥30,099
You Save: ¥2,901
Toda Racing Up Rated Valve Springs Set 4A-G 20V AE111
List Price: ¥24,200
Sale Price: ¥22,079
You Save: ¥2,121
Toda Racing High Power Profile IN Camshaft Type C - CL7 EP3 FD2 FN2 DC5
List Price: ¥69,300
Sale Price: ¥63,209
You Save: ¥6,091
Toda Racing High Power Profile EX Camshaft Type C2 - CL7 EP3 FD2 FN2 DC5
List Price: ¥64,900
Sale Price: ¥59,189
You Save: ¥5,711
Product Reviews
“ THE CUSTOMER'S VOICE ”
Bernard
10/2/2022
Quality
Price
Value
RHDJapan
Genuine Product
Genuine Product.
Gearóid
11/14/2020
Price
Value
Quality
RHDJapan
Great price
Great product for the price. always worth buying a toda pulley when changing the timing belt or doing upgraded cams.