Works Bell Standard Boss Kit - Honda Accord Civic Inspire Isuzu Gemini

Brand: Works Bell
Product: Standard Boss Kit - Honda Accord Civic Inspire Isuzu Gemini
Part Num: 211

SPECIFICATIONS:
- Included: All Hardware for Installation

COMPATIBILITY NOTES:
- Only for vehicles equipped with SRS.
- Innova:For vehicles from 02/92 to 02/95.
- Inspire CB/CC: For vehicles from 09/89 to 02/95.
- Inspire UA: For vehicles from 03/95 to 09/98.
- Civic EK: For vehicles from 09/95 to 08/97.
- MJ1 MJ2 MJ3: For vehicles from 09/93 to 01/97.
-any switches other than the horn button from the original wheel will be disabled
- If the diameter of serration in the steering shaft is 14.9mm, please use #211.
Diameter16.0mm=#221
- The length of the steering shaft fitting in the serration may be short. Please fix the boss kit with the center nut
tightened by fixed torque. (Figure2-4)
INSTALLATION NOTE:

FEATURES:
- The Boss Kit can exchange steering wheel to a car with genuine airbag.
- Works bell put the driver safety before everything else, The Boss Kit didn't have processed welding, adding, and heat processing at all in manufacture process of Universal Hub Kit.
- Universal Hub Kit has 12 holes and adopt to an attachment of momo pitch or NARDI pitch steering wheel.
- The Boss Kit is manufactured in a aluminum die-casing process (or aluminum shaving) from the original model product for each car.
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.